TM 5-3805-254-34
9-1.
FORWARD-REAR DIFFERENTIAL MAINTENANCE (Con’t).
h.
DIFFERENTIAL ASSEMBLY AND INSTALLATION
NOTE
If no-spin differential was disassembled, perform steps 1 through 5. If not, go to step 6.
1.
Install two drive gears (25), spring retainers (24), springs (23), and side gears (22) on spider (26).
2.
Install bolt (12) and washer (13) through center of assembly.
3.
Place no-spin differential assembly (14) on arbor
press.
4.
Press on head of bolt (12) and compress no-spin
differential assembly (14) slowly. As no-spin
differential assembly in compressed, ensure that
splines of side gears (22) and drive gears (25)
mesh.
TA703949
9-16
