TM 5-3805-254-34
9-1.
FORWARD-REAR DIFFERENTIAL MAINTENANCE (Con’t).
5.
Install washer (13) and nut (15) on bolt (12) to hold no-spin differential assembly (14) together. Remove no-spin
differential assembly from arbor press.
6.
Install no-spin differential assembly (14) into differential case (18) half.
7.
Install other differential case (18) half and assemble the differential case halves, matching scribe marks made
during disassembly, with four bolts (20) and nuts (21).
8.
Check to ensure that parts within differential case (18) rotate freely and that there is no binding.
9.
If removed, install two bearings (17) and spacers (16) on ends of differential case (18).
10.
Remove nut (15), two washers (13), and bolt (12) from no-spin differential assembly (14).
TA703950
9-17
