TM 5-3805-254-34
9-5.
REAR-REAR DIFFERENTIAL MAINTENANCE (Con’t).
12.
Temporarily install bearing cap (9) on legs of
differential carrier (2) with two bolts (8). Torque
bolts to 300 Ib.-ft. (407 N-m).
NOTE
Bearing races must have hand push
fit in bores. If bearing races are not
hand push fit, bores must be
reworked with a scraper or abrasive
cloth.
13.
Hand push bearing race (10) into bore created in
differential carrier (2).
14.
Remove bearing race (10) and bolts (8) from
legs of differential carrier (2).
15.
Repeat steps 12 through 14 for other side.
16.
Install two bearing races (10) and install
differential (11) into differential carrier (2).
17.
Install two bearing caps (9) on legs of differential
carrier (2) with four bolts (8). Torque bolts to
300 lb.-ft. (407 N-m).
18.
Install new lockwire (7) securing bolts (8) in
bearing caps (9) (see paragraph 1-21).
i
DIFFERENTIAL CARRIER INSTALLATION |
1.
Install new gasket (55) and cover (54) to
differential carrier (2) with eight new lockwashers
(56) and bolts (57).
TA703990
9-59
