TM 5-3805-254-34
10-2.
AIR COMPRESSOR GOVERNOR REPLACEMENT.
This Task Covers: Replacement
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Air compressor governor to air dryer lines disconnected
• One gasket
and tagged, and fittings removed from air
• Two lockwashers
compressor governor (see TM 5-3805-254-20).
• Air compressor governor to wet air reservoir lines
Tools/Test Equipment:
disconnected and tagged, and fittings removed from
air compressor governor (see TM 5-3805-254-20).
• General mechanic's tool kit
REPLACEMENT
1.
Remove two screws (2), lockwashers (3), air compressor go(1), and casket (4) from air compressor (5) Discard
gasket and lockwashers.
2.
Install new gasket (4) and air compressor governor (1) on air compressor (5) with two new lockwashers (3) and
screws (2).
FOLLOW-ON TASKS:
• Install fittings and connect air compressor governor to air dryer lines to air compressor governor (see TM 5-3805-254-
20).
• Install fittings and connect air compressor governor to wet air reservoir lines to air compressor governor (see TM 5-3805-
254-20).
TA703997
10-7
