TM 5-3805-254-34
10-3.
AIR COMPRESSOR REPAIR.
This Task Covers:
a. Disassembly
b. Cleaning and Inspection
c. Assembly
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Air compressor hoses and fittings disconnected (see
TM 5-3805-254-20).
• Alcohol evaporator and bracket removed (see TM 5
3805-254-20).
• Steering oil reservoir and bracket removed (see
TM 5-3805-254-20).
• Primary fuel filter and bracket removed (see TM 5
3805-254-20).
• Accelerator control rod disconnected from fuel pum:
(see TM 5-3805-254-20).
• Air compressor and fuel pump removed (see TM 5
2815-241-34&P).
• Fuel pump separated from air compressor (see TM 5
2815-241-34&P).
• Air compressor governor removed (see para
graph 10-2).
• Dry cleaning solvent (item 23, Appendix B)
• Marker tags (Item 25, Appendix B)
• One snapring
• Four keywashers
• Seven gaskets
• Ten piston rings
• Sixteen lockwashers
Tools/Test Equipment:
• General mechanic's tool kit
• Field automotive shop set
General Safety Instructions:
• Dry cleaning solvent is flammable and must not be
used near open flame. Use only in a well-ventilated
area.
a.
DISASSEMBLY
1.
Remove two bolts (9), lockwashers (8), flange (7), gasket (6), adapter (5), gasket (4), adapter (3), and gasket (2)
from block (1). Discard lockwashers and gaskets.
10-8
