TM 5-3805-254-34
12-2.
LEFT POWER STEERING GEAR REPAIR.
This Task Covers:
a. Disassembly
c. Assembly
b. Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Left power steering gear removed (see para-
• Lubricating oil (Item 13, Appendix B)
graph 12-1).
• Dry cleaning solvent (Item 23, Appendix B)
• One packing assembly
Tools/Test Equipment:
• Two gaskets
• General mechanic's tool kit
• Two seals
• Field automotive shop set
• Three performed packings
• Thirty lockwashers
General Safety Instructions:
• Dry cleaning solvent is flammable and must not be used near open flame. Use only in a well-ventilated area.
a.
DISASSEMBLY
NOTE
Perform step 1 at each end of steering gear.
1.
Loosen nut (1) and remove relief valve plunger (2), nut, and performed packing (3) from gear housing (4). Discard
performed packing.
2.
Remove eight screws (5), lockwashers (6), and housing cover (7) from gear housing (4). Discard lockwashers.
3.
Remove performed packing (8) from housing cover (7). Discard performed packing.
TA704015
12-4
