TM 5-3805-25434
13-2. FRONT SPRINGS REPLACEMENT (Con’t).
7.
Coat surface of pins (1 and 6) with grease.
8.
Place front springs (7) on hydraulic jack and position on front bracket (9).
9.
Install front springs (7) to front bracket (9) with pin (1), screw (8), and nut (2).
10.
Install rear of front springs (7) to two shackles (4) with pin (6), two screws (5), and nuts (3).
11.
Remove hydraulic jack.
FOLLOW-ON TASKS:
. Lubricate front springs (see LO 5-3805-254-12).
. Install front axle (see paragraph 8-1).
TA704088
13-12
