TM 5-3805-254-34
15-1.
ENGINE COVER REPLACEMENT.
This Task Covers:
a.
Removal
c.
Installation
b.
Cleaning
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
•
Detergent (Item 6, Appendix B)
•
General mechanic's tool kit
•
Rags (Item 17, Appendix B)
•
Sealant (Item 19, Appendix B)
•
One seal
a.
REMOVAL
1.
Pull floormat (6) and insulation (7) back from center floor cover plate (8) and expose screws (4).
2.
Remove 14 screws (4), flatwashers (3), bracket (2), and engine cover (5) from firewall (9).
3.
Remove seal (1) from firewall (9). Discard seal.
b.
CLEANING
Clean engine cover (5) in detergent and water solution. Rinse with clean water and wipe dry.
c.
INSTALLATION
1.
Apply sealant to new seal (1) and install seal on firewall (9).
2.
Install engine cover (5) and bracket (2) on firewall (9) with 14 washers (3) and screws (4).
3.
Position Insulation (7) and floormat (6) on center floor cover plate (8).
15-2
