TM 5-3805-254-34
14-11.
REAR CROSSMEMBER AND GUSSETS REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
•
Body subframe removed (see paragraph 14-4).
•
General mechanic's tool kit
•
Stoplight-taillights removed (see TM 5-3805-254-20).
•
Field automotive shop set
•
Pintle hook removed (see TM 5-3805-254-20).
Personnel Required: Two
a.
REMOVAL
1.
Remove three nuts (12), screws (14), spacer (13), and pintle hook mounting bracket (11) from rear crossmember
(9).
2.
Remove eight nuts (6) and screws (7) from frame (1) and rear crossmember (9).
3.
Remove six nuts (3), screws (4), and two top gussets (2) from rear crossmember (9).
4.
Remove eight nuts (5), screws (8), two brackets (15), rear crossmember (9), and two bottom gussets (10) from
frame (1).
TA704115
14-20
