TM 5-3805-254-34
14-9.
BOGIE CROSSMEMBER AND BRACKETS REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
•
Anchor hose, clamps, and extensions removed from
•
General mechanic's tool kit
bogie crossmember (see TM 5-3805-254-20).
•
Field automotive shop set
Personnel Required: Two
a.
REMOVAL
1.
Remove 16 nuts (2), screws (1), and bogie crossmember (3) from four brackets (7).
2.
Remove 12 nuts (4), screws (6), and four brackets (7) from frame (5).
b.
INSTALLATION
1.
Install four brackets (7) on frame (5) with 12 screws (6) and nuts (4).
2.
Install bogie crossmember (3) on four brackets (7) with 16 screws (1) and nuts (2).
FOLLOW-ON TASKS:
•
Install extensions, clamps, and anchor hose on bogie crossmember (see TM 5-3805-254-20).
TA704112
14-17
