TM 5-3805-254-34
14-6.
ENGINE CROSSMEMBER AND BRACKETS REPLACEMENT (Con’t).
5.
Remove spacer bar (13) from between left crossmember bracket (4) and frame (10).
b.
INSTALLATION
1.
Aline spacer bar (13) and left crossmember bracket (4) with holes in frame (10) and install left crossmember
bracket with four screws (11) and nuts (12).
2.
Install right crossmember bracket (1) on frame (10) with four screws (11) and nuts (12).
3.
Install engine crossmember (6) on right and left crossmember brackets (1 and 4) with eight screws (2) and nuts
(3).
4.
Install wiring harness (5) on engine crossmember (6) with two clamps (9), screws (8), and nuts (7).
FOLLOW-ON TASKS:
•
Install engine mounting brackets to engine crossmember (see paragraph 3-3).
•
Install radiator (see paragraph 4-4).
TA704109
14-13
