TM 5-3805-254-34
14-4.
BODY SUBFRAME MAINTENANCE
b.
REPAIR
Refer to TM 9-237 for instructions on subframe
repair.
c.
INSTALLATION
1.
If removed, install two body guides (6) on
subframe (7) using welder’s tool kit.
WARNING
Subframe is heavy. Ensure that all
personnel are clear before raising
subframe
to
prevent
In-jury
to
personnel.
2.
Using a suitable lifting device, raise subframe (7)
and position over frame (4).
3.
Install two body guides (6) to frame (4) with six
screws (5), new lockwashers (2), and nuts (1).
4.
Using welder’s tool kit, weld two rear mount guides (3) to subframe (7).
FOLLOW-ON TASKS:
•
Install hydraulic lift cylinder (see paragraph 17-1).
•
Install dump body (see paragraph 15-36).
TA704104
14-8
