TM 5-3805-254-34
14-2.
BUMPER REPLACEMENT (Con’t).
7.
Remove eight bolts (17), nuts (16), and two
brackets (8) from frame (15).
8.
Attach lifting device to tow loop crossmember
(18) and install tow loop crossmember from
frame (15).
b.
INSTALLATION
1.
Attach lifting device to tow loop crossmember
(18) and install tow loop crossmember on frame
(15).
2.
Install two brackets (8) on frame (15) with eight
bolts
(17)
and
nuts
(16).
3.
Install two supports (3) on bumper (9) with two screws (14) and nuts (13).
4.
Attach lifting device to bumper (9). Raise bumper and move to vehicle.
5.
Install bumper (9) to two brackets (8) with eight bolts (12), washers (7), and nuts (6).
6.
Remove lifting device.
NOTE
Perform steps 7 through 9 at left and right side of bumper.
7.
Install support (3) to splash shield (1) with screw (2) and nut (4).
8.
Install nut (11) on step (10).
9.
Install step (10) on bumper (9) with two nuts (5).
FOLLOW-ON TASKS:
Install grille guard (see paragraph 14-1).
Install slave receptacle (see TM 5-3805-254-20).
TA704101
14-5
