TM 5-3805-254-34
14-2. BUMPER REPLACEMENT (Con’t).
2.
Remove nut (4), screw (2), and support (3) from splash shield (1).
3.
Using suitable lifting device attached to bumper (9), raise lifting device Just enough to take weight of bumper off
two brackets (8).
4.
Remove eight nuts (6), washers (7), bolts (12), and bumper (9) from vehicle.
5.
Move bumper (9) to storage location and remove lifting device.
6.
Remove two screws (14), nuts (13), and supports (3) from bumper (9).
TA704100
14-4
