TM 5-3805-254-34
14-6.
ENGINE CROSSMEMBER AND BRACKETS REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
•
Radiator removed (see paragraph 4-4).
•
General mechanic's tool kit
•
Engine mounting brackets removed from engine
•
Field automotive shop set
crossmember (see paragraph 3-3).
Personnel Required: Two
a.
REMOVAL
1.
Remove two nuts (7) and screws (8), and remove two clamps (9) and wiring harness (5) from engine
crossmember.
2.
Remove four nuts (3) and screws (2) from engine crossmember (6) and left crossmember bracket (4).
3.
Remove four nuts (3) and screws (2) from engine crossmember (6) and right crossmember bracket (1). Remove
engine crossmember.
TA704107
14-11
