TM 5-3805-254-34
14-10.
TORQUE ROD CROSSMEMBERS AND GUSSETS REPLACEMENT (Con’t).
3.
Remove nut (11) and screw (9) from frame
crossmember (10) and upper gusset (1).
4.
Remove 16 nuts (14), screws (8), two upper
gussets (1), crossmembers (12 and 13), and two
lower gussets (7) from frame (2).
b.
INSTALLATION
1.
Install two lower gussets (7), crossmembers (12
and 13), and two upper gussets (1) to frame (2)
with 16 screws (8) and nuts (14).
2.
Install
screw
(9)
and
nut
(11)
to
frame
crossmember (10) and upper gusset (1).
3.
Install eight screws (6) and nuts (4) to two upper gussets (1) and frame (2).
4.
Install eight screws (5) and nuts (3) to two lower gussets (7) and frame (2).
FOLLOW-ON TASKS:
•
Install torque rods (see paragraph 13-4).
•
Install rear spring brackets and axle stops (see paragraph 13-3).
•
Install body subframe (see paragraph 14-4).
TA704114
14-19
