TM 5-3805-254-34
15-27.
TAILGATE RELEASE LEVER AND LINKAGE REPLACEMENT (Cont).
3.
With the aid of an assistant, position pull rod (19) in pull rod holes (24) in dump body.
4.
Install pull rod (19) on two connecting rods (22) with clevis pin (25) and new cotter pin (23).
5.
Install two connecting rods (22) on crank (26) with screw (27), two flatwashers (28), and nut (21).
6.
Install nut (18) on pull rod (19) until number of threads counted in removal are showing.
NOTE
Tailgate must be completely closed and hook must be tight against tailgate pins.
7.
Install clevis (16) on pull rod (i9). Aline hole in clevis with hole in hook (20). Tighten nut (18).
8.
Install clevis (16) on hook (20) with clevis pin (17) and new cotter pin (15).
TA704178
15-74