TM 5-3805-254-34
17-4.
HYDRAULIC OIL RESERVOIR REPLACEMENT.
This Task Covers:
a. Removal
c. Installation
b. Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Reservoir-to-pump suction hose and fittings discon-
Dry cleaning solvent (Item 23, Appendix B)
nected (see TM 5-3805-254-20).
Two lockwashers
• Hydraulic filter and housing removed (see TM 5-3805-
254-20).
Personnel Required: Two
General Safety Instructions:
Tools/Test Equipment:
• Dry cleaning solvent is flammable and must not be
•· General mechanic's tool set
used near open flame. Use only in a well-ventilated
•· Field automotive shop set
area.
a. REMOVAL
1.
Position floor jack under hydraulic oil reservoir (2) and support hydraulic oil reservoir.
TA704244
17-17
