TM 5-3805-264-13&P
0046
REMOVAL
1.
Disconnect air supply hose (Figure 1, Item 2) from adapter (Figure 1, Item 3).
2.
Disconnect air hose (Figure 1, Item 4) from adapter (Figure 1, Item 8).
3.
Remove four locknuts (Figure 1, Item 14), washers (Figure 1, Item 15), screws (Figure 1, Item 10), and air
reservoir (Figure 1, Item 11) from welded brackets (Figure 1, Item 1). Discard locknuts.
4.
Remove adapter (Figure 1, Item 3), bushing (Figure 1, Item 5), check valve (Figure 1, Item 6), elbow
(Figure 1, Item 7), and reducer (Figure 1, Item 9) from air reservoir (Figure 1, Item 11).
5.
Remove adapter (Figure 1, Item 8) from air reservoir (Figure 1, Item 11).
6.
Remove draincock with lanyard (Figure 1, Item 13) and plug (Figure 1, Item 12) from air reservoir
(Figure 1, Item 11).
END OF TASK
INSTALLATION
1.
Install draincock with lanyard (Figure 1, Item 13) and plug (Figure 1, Item 12) on air reservoir
(Figure 1, Item 11).
2.
Install adapter (Figure 1, Item 8) on air reservoir (Figure 1, Item 11).
3.
Install reducer (Figure 1, Item 9), elbow (Figure 1, Item 7), check valve (Figure 1, Item 6), bushing
(Figure 1, Item 5), and adapter (Figure 1, Item 3) on air reservoir (Figure 1, Item 11).
4.
Install air reservoir (Figure 1, Item 11) on welded brackets (Figure 1, Item 1) with four screws
(Figure 1, Item 10), washers (Figure 1, Item 15), and new locknuts (Figure 1, Item 14).
5.
Connect air hose (Figure 1, Item 4) to adapter (Figure 1, Item 8).
6.
Connect air supply hose (Figure 1, Item 2) to adapter (Figure 1, Item 3).
0046-2
03/15/2011Rel(1.10)root(maintwp)wpno(M1002126413)