TM 5-3805-264-13&P
0068
ASSEMBLY
NOTE
Use antiseizing tape on all pipe threads.
1.
Install drain plug (Figure 2, Item 10), elbow (Figure 2, Item 7), hose (Figure 2, Item 8), and cap
(Figure 2, Item 9).
NOTE
For information on manufacturing sight tube, refer to (WP 0074).
2.
Install two elbows (Figure 2, Item 5) and sight tube (Figure 2, Item 6) to hydraulic reservoir
(Figure 2, Item 11).
3.
Install strainer (Figure 2, Item 4) with six screws (Figure 2, Item 3). Install fill cap (Figure 2, Item 2).
WARNING
Eye protection and gloves must be worn when using grease or lubricating oils. Failure to
comply may result in personnel injury.
NOTE
Apply a light coat of lubricating oil to O-rings as they are assembled.
4.
Assemble filter housing (Figure 2, Item 13) with new O-ring (Figure 2, Item 15).
5.
Install new O-ring (Figure 2, Item 14) in filter housing mounting flange.
6.
Install pipe (Figure 2, Item 12) to filter housing (Figure 2, Item 13).
7.
Install filter housing (Figure 2, Item 13) to hydraulic reservoir (Figure 2, Item 11) with four screws
(Figure 2, Item 1).
8.
Install hydraulic oil filter element (WP 0063).
9.
Install hydraulic oil filter service indicator gauge (WP 0069).
0068-4
03/15/2011Rel(1.10)root(maintwp)wpno(M1004226413)