TM 5-3805-264-14&P
Table 4-2. Unit Preventive Maintenance Checks and Services (PMCS) for M917A1 and
M917A1 w/MCS Body (Con’t).
Location
Item To
Item
Check/
No.
Interval
Service
Procedure
14
Annual
Hvdraulic
a. With dump body down and engine
Reservoir
off, remove magnetic drain plug
from underside of reservoir (7).
Drain hydraulic oil into a suitable
container.
b. Remove fill cap (5). Remove
strainer from reservoir (7) (para-
graph 4-74). Clean strainer and
reinstall.
c. Replace hydraulic oil filter element
(paragraph 4-75).
3. Clean drain plug and reinstall.
NOTE
Hydraulic reservoir capacity is
12.75 gal. (48.2 I). Do NOT overfill.
e. Fill reservoir (7) with lubricating oil
(Item 12 or 13, Appendix F) until
level of fluid in sight tube (4) is at
FULL mark as indicated on oil level
decal (6). Install fill cap (5).
Not Fully Mission
Capable If:
4-26
