TM 5-3805-264-14&P
4-56.
MCS AIR CYLINDER REPLACEMENT (M917A1 W/MCS).
This task covers..
a. Removal
b. Cleaning and Inspection
c. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
l Chassis air system drained (TM 9-2320-363-10).
l Two cotter pins
l MCS air system drained (Chapter 2, Section II,
l Tie wraps (as required)
Opera for PMCS)
Personnel Required: Two
l MCS tailgate cover removed (paragraph 4-53).
General Safety Instructions:
Tools/Test Equipment:
l DO NOT disconnect air lines while air system is
l General mechanic’s tool kit (Item 8, Appendix I)
pressurized.
DO NOT disconnect air lines while air system is pressurized. Air system pressure
must be released before air lines are disconnected. A line disconnected under pres-
sure may cause personnel injury.
NOTE
1.
2.
Note location of tie wraps prior to removal to aid in installation.
Disconnect solenoid connector (5) from MCS tailgate wiring harness connector (4).
Disconnect air line (1) from elbow (2). If damaged, remove elbow from air cylinder solenoid (3).
4-79
