TM 5-3805-264-14&P
4-56.
MCS AIR CYLINDER REPLACEMENT (M917A1 W/MCS) (Con’t).
3.
Remove cotter pin (10) and pin (12) to remove air cylinder (9) from MCS gate (11). Discard cotter pin.
NOTE
Note position of nut at air cylinder piston shaft clevis to ensure proper adjustment
of air cylinder on installation.
4.
Remove cotter pin (8) and pin (6) to remove air cylinder (9) from MCS tailgate (7). Discard cotter pin.
b.
CLEANING AND INSPECTION
Clean and inspect components in accordance with Chapter 4, Section III, General Maintenance Instruc-
tions.
NOTE
Ensure that position of nut at air cylinder piston shaft clevis Is the same as noted
during removal, to ensure proper adjustment of air cylinder on installation.
1.
Install air cylinder (9) to MCS tailgate (7) with pin (6) and new cotter pin (8).
2.
Install air cylinder (9) to MCS gate (11) with pin (12) and new cotter pin (10).
4-80
