Table 3-1. Operator PMCS - M917 Dump Truck Body

Table 3-1. Operator PMCS - M917 Dump Truck Body Continued

TM-5-3805-274-10 Dump Truck Body M917 (NSN 3805-01-028-4389) Manual
Page Navigation
27

TM 5-3805-274-10 Table 3-1. Operator PMCS - M917 Dump Truck Body B - Before D - During A - After W - Weekly M - Monthly INTERVAL ITEM TO BE INSPECTED FOR READINESS REPORTING ITEM PROCEDURE: Check for and have repaired, Equipment is Not Ready/ NO B D A W M Filled Or Adjusted as needed Available If: NOTE Item number of columns shall be used as a source of item numbers for the "TM Number" column on DA Form 2404, Equipment Inspection and Maintenance Worksheet, in recording results of PMCS. Within designated interval, these checks are to be performed in the order listed. Perform weekly as well as before PMC’s if you are the assigned driver but have not operated the vehicle since the last weekly, or you are operating the vehicle for the first time. ELECTRICAL SYSTEM 1 • Visually inspect wiring and connectors for obvious dam- age, breaks or fraying. 2 • Make sure all clearance lamps are working; pull out headlamp switch on truck instrument panel and check marker lamps. DUMP BODY (CARGO) 3 • Visually inspect cargo body, Cracked, broken welds. cab protector and tailgate for obvious damage, weld breaks. 4 • Visually inspect for hydrau- Class III leaks are lic leaks. evident. 3-4

Privacy Statement
Press Release
Contact