TM 5-3805-274-10
Table 3-2. Troubleshooting Procedures - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
DUMP BODY
6.
BODY LEANS OR SHIFTS WHEN RAISED.
WARNING
Body may lean or shift because of high or
gusty winds. Do not attempt to dump under
these conditions.
Step 1.
Check that the dump truck is on level, firm ground.
Reposition the truck if necessary.
Step 2.
Check air pressure in tires.
Adjust air pressure in tires.
Front
100 psi
Rear
90 psi
Pusher Axle
90 psi
Step 3.
Check for broken spring on the chassis.
Report problem to Organizational Maintenance.
Step 4.
Check for wheels sinking unevenly in soft terrain.
Move truck so that wheels will not sink.
Step 5.
Check for load sticking on one side of body.
Lower the body all the way. Break up the sticky load.
7.
TAILGATE CONTROL LEVER WILL NOT RELEASE TAILGATE
LOCKING MECHANISM.
Step 1.
Check for signs of dry lube points.
Lubricate as necessary (see LO 5-3805-274-12).
Step 2.
Check for loose connections in the control lever linkage.
Notify Organizational Maintenance
if linkage is out of adjustment.
3-17
