TRUCK SERVICE MANUAL
BRAKES-AIR
MAINTENANCE
40, 000 km or 25, 000 Miles
Make sure all fittings are tight and bubbles are present in
alcohol when compressor is compressing air. Refer to
Trouble Shooting Guide if evaporator assembly is not
operating properly.
80, 000 km or 50, 000 Miles
If strainer is present, check to be sure it is clear. Clean
or replace if necessary.
160, 000 km or 100, 000 Miles
Disassemble evaporator and check valve (if equipped);
clean all parts, replacing all gaskets and rubber parts.
FILLING
1. Always use the filler plug on AE-1 evaporator.
Frequent removal of alcohol reservoir will cause
leakage and affect performance.
2. Fill reservoir 2/3 full. Be certain proper alcohol is
used.
DISASSEMBLY,
CLEANING
AND
INSPECTION,
REASSEMBLY
1. Carefully disassemble, noting order of removal
of parts.
2. Wash all metal parts in solvent; wipe all rubber
parts clean.
3. Inspect all parts and replace all parts not
considered serviceable.
4. Assemble parts, making sure new gaskets and
rubber parts are properly installed.
TESTING FOR SERVICEABILITY
should be evident in alcohol. If air bubbles are not
present, check Trouble Shooting Guide.
171