STEERING
TRUCK SERVICE MANUAL
4. Lift off the ring and remove the locating pins,
7. Remove drive gear from shaft and key if so
Fig.9.
equipped.
8. Using Tru-Arc pliers remove the snap ring
retaining the outer bearing in the body, Fig. 12.
Fig. 9
5. Remove the "110 ring from the body, Fig. 10.
Fig. 12
9. With a soft hammer tap on the splined end of the
shaft to force the shaft and
Fig. 10
6. Separate the vanes from the rotor and remove
the rotor from the shaft, Fig. 11.
Fig. 13
10. Support the bearing inner race and press the
shaft out of the bearing, Fig. 14.
Fig. 11
628
