TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
a.
If multimeter reads no continuity, replace right stoplight/taillight assembly (9) (page 2-
791).
b.
If multimeter reads 0 ohms, place wire terminal (4) in position and push on to terminal
(7) on right stoplight/taillight assembly (9). Put terminal cover (10) on right
stoplight/taillight assembly (9). Screw in four screws (11) and tighten using number
one cross-tip screwdriver.
2-167
