TM 5-3805-254-20-1
ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
78. STEERING WHEEL IS HARD TO TURN CLOCKWISE - CONTINUED.
Step 15.
Check two front tires (1) for uneven tire wear (TM 5-3805-254-10).
a.
If two front tires (1) are worn unevenly, front alignment must be
checked. Notify Direct Support Maintenance.
b.
If two front tires (1) are not worn unevenly, and alignment is good,
go to step 16.
Step 16.
Check two front wheels (2) for bent, cracked, or broken condition.
a.
If two front wheels (2) are bent, cracked, or broken, replace wheel
(2) (page 2-1168).
b.
If two front wheels (2) are not bent, cracked, or broken, go to
step 17.
WARNING
Do not operate dump truck with tires of different construction. Injury to personnel and equipment
could occur.
Step 17.
Check front axle (3) for two different tire sizes or two different tire types.
a.
If front axle (3) has two different tire sizes, refer to (TM 5-3805-
254-10) for proper tire size. Replace incorrect tires (page
2-1168).
b.
If front axle (3) has two different tire types, refer to (TM 5-3805-
254-10) for proper tire type. Replace incorrect tires (page
2-1168).
c.
If front axle (3) does not have two different tire sizes, or different tire
types, go to step 18.
WARNING
When jacking vehicle, be sure vehicle is on level ground. Put blocks in front and behind each
wheel to prevent vehicle from moving, and support vehicle with trestle stands to prevent
personnel injury.
2-408
