TM 5-3805-254-20-1
ENGINE AUXILIARY OIL FILTER HOSES AND FITTINGS
This task covers:
a.
Removal (page 2-465.0)
b.
Inspection/Replacement (page 2-465.2)
b.
Cleaning (page 2-465.2)
d.
Installation (page 2-465.4)
INITIAL SETUP:
Equipment Conditions
Materials/Parts
Engine auxiliary oil filter drained (see page 2-10).
Detergent, liquid, GP (Item 7, Appendix C)
Rags, wiping (Item 15, Appendix C)
Tools/Test Equipment
Solvent, drycleaning (Item 19, Appendix C)
Tags, marker (Item 21, Appendix C)
Wrench, open-end, 7/16-inch
Tape, antiseizing (Item 22, Appendix C)
Wrench, box-end, 1/2-inch
Wrench, open-end, 5/8-inch
Personnel Required
Wrench, open-end, 3/4-inch
Wrench, open-end, 7/8-inch
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Tag hoses to ensure correct installation.
1.
Oil filter shell (1)
Hose (2) and hose (3)
Tag.
2.
90-degree elbow (4)
Line nut (5)
Using 3/4-inch open-end wrench, unscrew, and
take off.
3.
90-degree elbow (6)
Line nut (7)
Using 3/4-inch open-end wrench, unscrew, and
take off.
4.
Oil filter shell (1)
90-degree elbows
Using 5/8-inch open-end wrench, unscrew, and
(4 and 6)
take off.
Change 1 2-465.0
