TM 5-3805-254-20-1
ENGINE AUXILIARY OIL FILTER SHELL
This task covers:
a.
Removal (page 2-465.8)
c.
Inspection/Replacement (page 2-465.10)
b.
Cleaning (page 2-465.10)
d.
Installation (page 2-465.10)
INITIAL SETUP:
Equipment Conditions
Materials/Parts
Windshield washer reservoir removed
Rags, wiping (Item 15, Appendix C)
(page 2-1344.1).
Solvent, drycleaning (Item 19, Appendix C)
Engine auxiliary oil filter hoses and fittings discon-
Locknut, mounting bracket (four required)
nected (page 2-465.0).
Engine auxiliary oil filter element removed (see
References
page 2-10).
TM 9-247 (Authorized Cleaning Methods)
Tools/Test Equipment
Personnel Required
Wrench, open-end, 9/16-inch
Wrench, box-end, 9/16-inch
One
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Oil filter mounting
Four screws (3), nuts
Using 9/16-inch open-end wrench and 9/16-inch
brackets (1 and 2)
(4), and washers (5)
box-end wrench, unscrew and take out.
2.
Oil filter mounting
Oil filter mounting
Take off.
bracket (2)
bracket (1),
extension (6), and
oil filter shell (7)
3.
Oil filter mounting
Four screws (9),
a.
Using 9/16-inch open-end wrench and
brackets (2 and 8)
locknuts (10), and
9/16 box-end wrench, unscrew, and take out.
washers (11)
b.
Get rid of locknuts.
4.
Oil filter mounting
Oil filter mounting
Take off.
bracket (8)
bracket (2)
5.
Cab firewall (12)
Four screws (13),
Using 9/16-inch open-end wrench and 9/16-inch
washers (14), and two
box-end wrench, unscrew, and take out.
nuts (15)
6.
Oil filter mounting
Take off.
bracket (8)
Change 1 2-465.8
