TM 5-3805-254-20-1
PRIMARY FUEL FILTER HOUSING
This task covers:
a.
Removal (page 2-470)
c.
Inspection/Replacement (page 2-473)
b.
Cleaning (page 2-472)
d.
Installation (page 2-474)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Gloves, safety
Oil, fuel, diesel (item 12, appendix C)
Goggles, safety
Ring (two required)
Gun, air blow
Tags, marker (item 21, appendix C)
Handle, ratchet, 1/2-inch drive
Hose, air, assembly
Personnel Required
Socket, 9/16-inch, 1/2-inch drive
Wrench, box-end, 9/16-inch
One
Wrench, open-end, 15116-inch
Wrench, open-end, 1-inch
Equipment Condition
Materials/Parts
Primary fuel filter removed (page 2-466).
Cloth, crocus (item 2, appendix C)
References
Lockwasher, mounting bracket
(three required)
TM 9-247 (Authorized Cleaning Methods)
Solvent, drycleaning (item 19,
appendix C)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Diesel fuel burns easily. Do not smoke or allow flames nearby. Disconnect batteries when
working on fuel system. Failure to observe these precautions could cause serious injury or death
to personnel.
NOTE
Fuel filter housing is stamped with IN and OUT near fuel hose fittings. Use this for identification
of fuel hoses.
1.
Fuel filter
Two fuel hoses (2)
Using marker tags, tag for identification.
housing (1)
2-470
