TM 5-3805-254-20-1
PRIMARY FUEL FILTER HOUSING - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
WARNING
Diesel fuel burns easily. Do not smoke or allow flames nearby. Disconnect batteries when
working on fuel system. Failure to observe these precautions could cause serious injury or death
to personnel.
11.
Mounting bracket (1)
Fuel filter
Aline screw holes.
housing (2)
12.
Fuel filter
Three screws (3),
Screw in and tighten using 9/16-inch, 1/2-
housing (2)
three new lock-
inch drive socket and ratchet handle and
washers (4), and
9/16-inch box-end wrench.
three nuts (5)
CAUTION
Care must be taken when performing next step to prevent damaging O-rings.
13.
Two fuel hose
Two new rings (7)
a.
Coat with clean diesel fuel oil.
fittings (6)
b.
Put onto hose fitting until seated.
CAUTION
Do not overtighten hose fittings to prevent damaging O-rings.
14.
Fuel filter
Two fuel hose
a.
Screw in until O-rings seat in fuel filter
housing (2)
fittings (6)
housing.
b.
Position fuel hose fittings in same posi-
tion as before removal.
CAUTION
Do not overtighten locknuts, damage to fuel filter housing, fuel hose fittings, and 0rings could
occur.
2-474
