TM 5-3805-254-20-1
PREHEATER PRIMER PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
5.
Dashboard (6)
Knob (7) and
a.
Push in and turn to unlock, then pull out
shaft (8)
to stop.
b. Using 6-inch slip-joint pliers, hold shaft
and unscrew and take off knob.
6.
Locknut (9) and
a. Using 11/16-inch open-end wrench,
collar (10) loosen.
b. Aline pins on shaft with slots in locknut
and pull off.
c. Push collar on shaft (8).
7.
Nut (11) and pre-
a. Using 13/16-inch open-end wrench,
heater primer
unscrew and take off nut.
pump (1)
b. Take out preheater primer pump.
8.
Pre-heater primer
Outlet fitting (4)
Using 1/2-inch open-end wrench, unscrew
pump (1)
and inlet
and take off.
fitting (5)
TA244014
2-485
