TM 5-3805-254-20-1
PRIMING FUEL SYSTEM - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
FILLING PRIMARY FUEL FILTER - CONTINUED
NOTE
Support canister while removing screw.
1.
Fuel filter
Screw (2), washer
a.
Using 3/4-inch, 1/2-inch drive socket
housing (1)
(3), packing (4),
and ratchet handle, unscrew and take
and canister (5)
out.
b.
Get rid of packing.
2.
Canister gasket (6)
a.
Take out.
b.
Get rid of.
3.
New canister
a.
Coat with clean diesel fuel oil.
gasket (6)
b.
Put in.
4.
Canister (5)
Fill with clean diesel fuel oil.
NOTE
Support canister while installing screw.
5.
Fuel filter
Screw (2), washer
Aline canister and screw in screw until
housing (1)
(3), new packing
snug.
(4), and canister (5)
Do not tighten.
6.
Screw (2)
Tighten to 25 to 30 ft lb (35 to 42 N•m)
using 3/4-inch, 1/2-inch drive socket and
0 to 175 ft lb (0 to 245 N•m) torque
wrench.
FILLING SECONDARY FUEL FILTER
7.
Rear of fuel
Filter element (8)
Using oil filter wrench, unscrew and take
pump (7)
off.
8.
Filter element (8)
a.
Coat with clean diesel fuel oil.
and gasket (9)
b.
Fill with clean diesel fuel oil.
c.
Screw on until gasket makes contact
with fuel pump, then tighten three-
quarters turn.
2-482
