TM 5-3805-254-20-1
FUEL PUMP FUEL FILTER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
NOTE
Position magnetic filter with hole facing into fuel pump.
7.
Top of fuel
Magnetic filter (2)
Put in.
pump (1)
and spring (3)
8.
Filter cap (4)
New cap seal (5)
Put on.
9.
Top of fuel
Filter cap (4)
Screw in until O-ring touches housing.
pump (1)
Do not tighten.
10.
Filter cap (4)
Tighten to 20 to 25 ft lb (28 to 35 N•m)
using 1/12-inch, 1/2-inch drive, flat-tip
screwdriver bit and 0 to 175 ft lb (2 to 245
N•m) torque wrench.
NOTE
FOLLOW-ON MAINTENANCE:
1.
Close left side hood panel (page 2-424).
2.
Connect battery cables (page 2-424).
TASK ENDS HERE
TA244012
2-480
