TM 5-3805-254-20-1
GLOW PLUG
This task covers:
a. REMOVAL (pages 2-512)
c.
TESTING (page 2-512)
b. INSPECTION (page 2-512)
d.
INSTALLATION (page 2-513)
INITIAL SETUP:
Tools
Personnel Required
Power supply, 12 vdc
One
Wire, jumper (two required)
Wrench, box-end, 3/8-inch
Equipment Condition
Wrench, box-end, 7/8-inch
Left side hood panel opened (page 2-424).
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Preheater
Glow plug (2), nut
a.
Using 3/8-inch box-end wrench, un-
housing (1)
(3), wire (4), and
screw and take off nut.
flat washer (5)
b.
Take off wire and flat washer.
2.
Glow plug (2)
Using 7/8-inch box-end wrench, unscrew
and take out.
INSPECTION
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-
424).
3.
Glow plug (2)
Look for cracks, breaks, gouges, or stripped threads.
TESTING
WARNING
Do not let positive wire touch metal surfaces at any time. Personal injury and equipment damage will occur.
2-512
