TM 5-3805-254-20-1
EXHAUST PIPE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
5.
Loop clamp (1)
Two nuts (2) and
Using 11/16-inch, 1/2-inch drive, deep
two flat washers (3)
socket and ratchet handle, unscrew and
take off.
6.
Metallic hose (4)
Loop clamp (1) and
Take off.
saddle (5)
NOTE
Assistant must support front and rear exhaust pipes and exhaust pipe elbow when performing
steps 7, 8, and 9.
7.
Clamp (6)
Nut (7)
Using 7/16-inch box-end wrench, unscrew
and take off.
8.
Exhaust pipe
Clamp (6)
Take off.
elbow (8) and
turbocharger (9)
9.
Exhaust
Rear exhaust pipe
a.
Pull off rear exhaust pipe.
diverter (10)
(11), front exhaust
b.
Take front and rear exhaust pipe
pipe (12), and ex-
and exhaust pipe elbow out from under
haust pipe elbow (8)
dump truck.
DISASSEMBLY
WARNING
Edges of exhaust system components are sharp. Care must be taken to prevent personal injury.
10.
Loop clamp (13)
Two nuts (14)
Using 11116-inch box-end wrench, un-
and two flat
screw and take off.
washers (15)
11.
Loop clamp (16)
Two nuts (17)
Using 11/16-inch box-end wrench, un-
and two flat
screw and take off.
washers (18)
12.
Metallic hose (19)
Two loop clamps (13)
Take off.
and (16) and two
saddles (20)
2-592
