TM 5-3805-254-20-1
Section VIII. EXHAUST SYSTEM MAINTENANCE
Page
Page
Exhaust Diverter .........................................
2-600
Exhaust Pipe Front Hanger...............................
2-619
Exhaust Diverter Bracket............................
2-611
Exhaust Pipe Rear Hanger ...............................
2-621
Exhaust Diverter Bracket
Muffler and Rain Cap ........................................
2-604
Supports .....................................................
2-615
Muffler Upper Support ......................................
2-624
Exhaust Pipe ..............................................
2-590
EXHAUST PIPE
This task covers:
a.
Removal (page 2-590)
d.
Inspection/Replacement (page 2-594)
b.
Disassembly (page 2-592)
e.
Assembly (page 2-594)
c.
Cleaning (page 2-594)
f.
Installation (page 2-596)
INITIAL SETUP:
Tools
Materials/Parts
Brush, wire
Rags, wiping (item 15, appendix C)
Gloves, safety
Solvent, drycleaning (item 19, appendix C)
Goggles, safety
Handle, ratchet, 1/2-inch drive
Personnel Required
Socket, deep, 9/16-inch, 1/2-inch
drive
Two
Socket, deep, 11/16-inch, 1/2-inch
drive
Equipment Condition
Wrench, box-end, 7116-inch
Wrench, box-end, 9/16-inch
Right side hood panel opened
Wrench, box-end, 11/16-inch
(page 2-424)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Exhaust system parts become very hot when engine is running. Allow time for parts to cool
before working on exhaust system. Hot exhaust system parts will cause serious burns.
1.
Two clamp halves (1)
Three screws (2),
Using 9/16-inch box-end wrench and 9/16-
three nuts (3), and
inch, 1/2-inch drive, deep socket and
spring (4)
ratchet handle, unscrew and take off.
2-590
