TM 5-3805-254-20-1
MUFFLER UPPER SUPPORT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
11.
Side of cab (1)
Upper bracket (2),
a.
Put upper and lower bracket in position.
lower bracket (3),
b.
Screw in and tighten four screws.
and four screws (4)
Hand tighten only.
12.
Upper bracket (2)
Insulator (5)
Put in place.
and lower bracket (3)
13.
Three screws (6)
Screw in and tighten using two 7/16-inch
and three nuts (7)
box-end wrenches.
14.
Four screws (4)
Tighten using 1/2-inch box-end wrench.
15.
Insulator (5)
Spacer (8) and
Put in position.
mounting plate (9)
16.
Mounting plate (9)
Three screws (10)
Screw in and tighten using two 7/16-inch
and three nuts (11)
box-end wrenches.
17.
Muffler pipe (12)
Loop clamp (13)
Put in position.’
and spacer (8)
and saddle (14)
18.
Loop clamp (13)
Two nuts (15)
Screw on and tighten using 9/16-inch box-
and two flat
end wrench.
washers (16)
2-626
