TM 5-3805-254-20-1
RADIATOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DRAINING - CONTINUED
6.
Engine oil
Draincock (2)
a.
Place 6-gallon container underneath.
cooler (1)
b.
Using 8-inch slip-joint pliers, turn
counterclockwise to open.
c.
Allow coolant to drain.
d.
Turn clockwise to close using 8-inch
slip-joint pliers.
e.
Get rid of coolant.
See note above.
f.
Go to step 11 to refill.
NOTE
Perform steps 1 thru 6 before flushing radiator.
FLUSHING
7.
Filler neck (3)
Radiator (4)
Using water hose, fill with water.
8.
Radiator outlet
Draincock (6)
a.
Using 8-inch slip-joint pliers, turn
pipe (5)
counterclockwise to open.
b.
Regulate water going into radiator at
same speed as water coming out of
draincock.
9.
Dump truck
a.
Start engine (TM 5-3805-254-10).
Run engine until all water coming out
of draincock is clear.
b.
Shut down engine
(TM 5-3805-254-10).
c.
Take out water hose.
10.
Radiator outlet
Draincock (6)
a.
Allow water to drain into suitable
pipe (5)
container or shop drainage system.
b.
Turn clockwise to close using 8-inch
slip-joint pliers.
REFILLING
11.
Torque converter
Draincock (8)
Using 8-inch slip-joint pliers, turn
cooler (7)
counterclockwise to open.
12.
Radiator (4)
Filler neck (3)
a.
Using 3-gallon radiator filling can, or a
hose with regulated output, fill with
coolant until a steady stream of coolant
flows from draincock (8).
2-630
