TM 5-3805-254-20-1
EXHAUST PIPE REAR HANGER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
8.
Support (6)
Screw (7), two
Put in position.
hangers (8), two
Hand tighten only.
bushings (9), and
nut (10)
9.
Exhaust pipe
Two hangers (8),
a.
Aline holes in hangers with holes in
clamp (1)
screw (2), spring (5),
exhaust pipe clamp.
flat washer (4), and
b.
Put in screw, spring, flat washer and
nut (3) nut.
c.
Tighten using 9/16-inch, 1/2-inc:, drive
socket and ratchet handle and 9/16-inch
box-end wrench.
10.
Support (6)
Screw (7) and
Tighten using 9/16-inch, 1/2-inch drive
nut (10)
socket and ratchet handle and 9/16-inch
box-end wrench.
TASK ENDS HERE
TA244102
2-623
