TM 5-3805-254-20-1
RADIATOR INLET HOSE
This task covers:
a.
Draining (page 2-4)
b.
Filling (page 2-5)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Gloves, safety
Rags, wiping (item 15, appendix C)
Goggles, safety
Sealer, silicone rubber (item 16, appendix C)
Scraper, gasket
Solvent, dry-cleaning (item 19, appendix C)
Screwdriver, flat-tip, 1/4-inch
Wrench, box-end, 9/16-inch
Personnel Required
Materials/Parts
One
Detergent, liquid, GP (item 7,
Equipment Condition
appendix C)
Gasket, radiator inlet
Right side hood panel opened (page 2-424).
Lockwasher, radiator inlet screw
Cooling system drained (page 2-628).
(two required)
ACTION
LOCATION
ITEM
REMARKS
1.
Hose (1)
Two clamps (2)
Using 1/4-inch flat-tip screwdriver,
loosen.
2-643
