TM 5-3805-254-20-1
RADIATOR BYPASS COOLANT LINE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Hose (1)
Two clamps (2)
Using 1/4-inch flat-tip screwdriver,
loosen.
2.
Elbow (3)
Two screws (4) and
a.
Using 9116-inch box-end wrench, un-
two lockwashers (5)
screw and take out.
b.
Get rid of lockwashers.
3.
Transmission oil
Elbow (3)
Take off.
cooler (6)
4.
Elbow (3)
Gasket (7)
a.
Using gasket scraper, scrape off.
b.
Get rid of gasket.
5.
Bypass pipe (8)
Screw (9) and
a.
Using 1/2-inch box-end wrench, un-
lockwasher (10)
screw and take out.
b.
Get rid of lockwasher.
6.
Clamp (11)
Take off.
7.
Elbow (3) and
Hose (1) and two
Take off.
bypass pipe (8)
clamps (2)
8.
Water pump (12)
Bypass pipe (8)
Take out.
9.
Bypass pipe (8)
Packing (13)
a.
Take off.
b.
Get rid of packing.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-424).
10.
Hose (1)
a.
Clean with solution of liquid detergent
and water.
b.
Rinse in clean water.
c.
Using clean, dry rags, wipe dry.
2-648
