TM 5-3805-254-20-1
RADIATOR HOSE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
14.
Water transfer
Reducer (2)
a.
Wrap pipe threads with antiseizing tape (page
connection (1)
2-424).
b.
Screw in and tighten using 1 3/8-inch open-end
wrench.
15.
Reducer (2)
Elbow (3)
a.
Wrap pipe threads with antiseizing tape (page
2-424).
b.
Screw in and tighten using 1 1/8-inch open-end
wrench.
16.
Elbow (4)
New gasket (5)
Put in place using silicone sealer.
17.
Radiator (6)
Elbow (4)
Put in place.
18.
Elbow (4)
Two washers (7),
Screw in and tighten using 1/2-inch, 3/8-inch drive
new lockwashers (8),
socket and ratchet handle.
and screws (9)
19.
Hose (10)
Clamp (11)
Put on.
20.
Elbow (3)
Clamp (12) and hose
a.
Put on clamp.
(10)
b.
Put on hose.
c.
Tighten clamp using 1/4-inch flat-tip screwdriver.
21.
Elbow (4)
Clamp (12) and hose
a.
Put on clamp.
(10)
b.
Put on hose.
c.
Tighten clamp using 1/4-inch flat-tip screwdriver.
22.
Extension (13)
Clamp (11), screw (14),
a.
Aline holes in clamp and extension.
and new locknut (15)
b.
Screw in and tighten using 7/16-inch open-
end wrench and 7/16-inch box-end wrench.
NOTE
FOLLOW-ON MAINTENANCE:
1.
Refill cooling system (page 2-628).
2.
Close left and right side hood panels (page 2-424).
Change 1 2-651.4
