TM 5-3805-254-20-1
RADIATOR DEAERATION HOSE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance
Instructions (page 2-424).
7.
Hose (1)
a.
Check for cracks, breaks, chafing, or hardness.
b.
Look for excessive rust or corrosion.
8.
All threaded parts
Look for damaged threads.
INSTALLATION
CAUTION
Antiseizing tape must be used on all pipe threads to provide a good seal and to
prevent threaded parts from seizing.
NOTE
For more information on how to use antiseizing tape, go to General Maintenance
Instructions (page 2-424).
9.
Water manifold (2)
Adapter (3)
a.
Wrap pipe threads with antiseizing tape (page
2-424).
b.
Screw in and tighten using 11/16-inch open-end
wrench.
10.
Radiator (4)
Adapter (5)
a.
Wrap pipe threads with antiseizing tape (page
2-424).
b.
Screw in and tighten using 11/16-inch open-end
wrench.
11.
Adapter (3)
Line nut (6) of hose
Screw on and tighten using 11/16-inch open-end
(1)
wrench.
12.
Adapter (5)
Line nut (7) of hose
Screw on and tighten using 11/16-inch open-end
(1)
wrench.
NOTE
FOLLOW-ON MAINTENANCE:
1.
Refill cooling system (page 2-628).
2.
Close left and right side hood panels (page 2-424).
Change 1 2-651.8
