TM 5-3805-254-20-1
RADIATOR DEAERATION HOSE
This task covers:
a.
Removal (page 2-651.6)
c.
Inspection/Replacement (page 2-651.7)
b.
Cleaning (page 2-651.6)
d.
Installation (page 2-651.7)
INITIAL SETUP
Equipment Conditions
Materials/Parts
Left and right side hood panels opened (page
Detergent, liquid, GP (Item 7, Appendix C)
2-424).
Rags, wiping (Item 15, Appendix C)
Cooling system drained (page 2-628).
Solvent, drycleaning (Item 19, Appendix C)
Tape, antiseizing (Item 22, Appendix C)
Tools/Test Equipment
Personnel Required
Gloves, safety
Goggles, safety
One
Wrench, open-end, 11/16-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Adapter (1)
Line nut (2)
Using 11/16-inch open-end wrench, unscrew, and
take off.
2.
Adapter (3)
Line nut (4)
a.
Using 11/16-inch open-end wrench, unscrew,
and take off.
b.
Take out hose (5).
3.
Radiator (6)
Adapter (1)
Using 11/16-inch open-end wrench, unscrew, and
take off.
4.
Water manifold (7)
Adapter (3)
Using 11/16-inch open-end wrench, unscrew, and
take off.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance
Instructions (page 2-424).
5.
All rubber parts
a.
Clean with solution of liquid detergent and water.
b.
Rinse in clean water.
c.
Using clean, dry rags, wipe dry.
Change 1 2-651.6
