TM 5-3805-254-20-2
FRONT MARKER LIGHT - CONTINUED
INITIAL SETUP
Tools
Personnel Required
Screwdriver, cross-tip, number one
One
Materials/Parts
Gasket, lens
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Steps given are typical for both left and right front marker lights.
This procedure is limited to the replacement of lens, gasket, and lamp.
1.
Turn signal (1)
Four screws (2),
a.
Using number one cross-tip screw-
lens (3), and
driver, unscrew and take out.
gasket (4)
b.
Get rid of gasket.
2.
Marker lamp (5)
Push in, turn counterclockwise and take
out.
INSPECTION/REPLACEM ENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-424).
3.
Lens (3)
Look for cracks or breaks.
4.
Turn signal (1)
Look for cracks, breaks or corrosion.
If defective, replace front turn signal
(page 2-795).
5.
All threaded parts
Look for damaged threads or rounded
heads.
2-800
