TM 5-3805-254-20-2
CAB ROOF MARKER LIGHT AND CLEARANCE LIGHT - CONTINUED
INITIAL SETUP
Tools
Personnel Required
Screwdriver, cross-tip, number one
One
Screwdriver, cross-tip, number two
Screwdriver, flat-tip, 3116-inch
Materials/Parts
Gasket, lens
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Steps given are typical for both marker lights and clearance lights.
Take off cover nearest to marker light or clearance light to be removed.
1.
Cab ceiling (1)
Cover (2) and
Using number one cross-tip screwdriver,
six screws (3)
unscrew and take out.
2.
Connector (4)
Pull apart.
3.
Marker light
Lens (6) and
a.
Using 3/16-inch flat-tip screwdriver,
body (5)
gasket (7)
out.
b.
Get rid of gasket.
4.
Lamp (8)
Push in, turn counterclockwise and take
out.
5.
Adjustment
Using 3/16-inch flat-tip screwdriver,
screw (9)
loosen.
6.
Cab roof (10)
Marker light
Bend forward.
body (5)
7.
Marker light
Rear screw (11)
Using number two cross-tip screwdriver,
body (5)
unscrew and take out.
8.
Cab roof (10)
Marker light
Bend to rear.
body (5)
2-802
