TM 5-3805-254-20-2
CAB ROOF MARKER LIGHT AND CLEARANCE LIGHT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT
NOTE
Replace all damaged or defective parts.
For more information on how to inspect parts, go to General Maintenance Instructions (page 2-424).
11.
Marker light
Look for cracks, breaks or corrosion.
body (1)
12.
Lens (2)
Look for cracks or breaks.
13.
All threaded parts
Look for damaged threads or rounded
heads.
INSTALLATION
NOTE
Steps given are typical for both marker lights and clearance lights.
14.
Cab roof (3)
Marker light body
a.
Put wire through hole in pad.
(2), pad (4), and
b.
Put wire through hole in roof.
wire (5)
c.
Put marker light in place.
15.
Cab ceiling (6)
Connector (7)
Push together.
16.
Cover (8) and
a.
Put cover in place.
six screws (9)
b.
Screw in and tighten using number one
cross-tip screwdriver.
17.
Cab roof (3)
Marker light
Bend to rear.
body (1)
18.
Marker light
Front screw (10)
Screw in and tighten using number two
body (1)
cross-tip screwdriver.
19.
Cab roof (3)
Marker light
Bend forward.
body (1)
20.
Marker light
Rear screw (11)
Screw in and tighten using number two
body (1)
cross-tip screwdriver.
21.
Cab roof (3)
Marker light body
a.
Bend light into position.
(1) and adjustment
b.
Tighten adjustment screw using 3/16-
screw (12)
inch flat-tip screwdriver.
2-804
